Stainless steel faucets lead the industry's new development trend

When the copper faucet still dominates the absolute market, the continuous emergence of stainless steel faucet manufacturers has caused more and more thinking. Will stainless steel faucets be the future trend?

“The faucet material will gradually replace copper with stainless steel.” In recent years, many people in the industry have put forward such a point of view. As consumers pay more attention to environmental protection and health, a healthier, more environmentally friendly, 100% recycling Stainless steel faucets will become the future trend. Stainless steel faucet is an emerging product. In recent years, it has become more and more popular among consumers. As the technology matures, it will become more and more popular, and it will seize more market share of copper faucets. Recently, the reporter visited some companies that produce stainless steel faucets and some of the sellers of the products to understand the current situation of stainless steel faucets.

It is reported that many domestic hardware plumbing manufacturers began to develop stainless steel faucets three years ago, but because of its hardness, toughness, solution casting and cutting processing, stainless steel is much more difficult and costly than copper. These manufacturers have either not yet developed successfully, or have abandoned development, or only one or two styles have been successfully developed. Among the international brands, Hansgrohe and Huayida have produced stainless steel faucets, while there are about four or five companies producing stainless steel faucets in Kaiping, Guangdong. Now more and more companies are gradually mastering. Related production R&D technology. According to General Manager Liu of Jiangmen Changyang Sanitary Ware Co., Ltd., the company has been focusing on the research and development of stainless steel sanitary ware products two or three years ago. Changyang is also the first company in Pengjiang District to produce stainless steel faucets. Mainly in the domestic market. However, with the increasing popularity of stainless steel faucets in the terminal market, many companies have increased the production line of stainless steel faucets. For example, Zhongjie Holding Group, which mainly produces stainless steel faucets that meet the sanitary standards of European and American sanitary products, is developing in Cuishan Lake, Kaiping City, Guangdong Province this year. The district purchased a total of 130 mu and invested 500 million yuan to build a stainless steel faucet production base.

As the manufacturing process of stainless steel faucets has gradually matured in China, stainless steel faucets have been greatly improved in terms of production and grade, and in terms of materials, stainless steel materials are healthier and more environmentally friendly, and can be recycled 100%. Stainless steel faucets are an emerging product in China. Although they have a small share in the domestic market, they are increasingly favored by consumers in recent years because of their health, environmental protection and durability. Mature will also become more and more popular, grab more market share of copper faucets, stainless steel faucets will become the development trend of the future sanitary ware industry.

There are four main types of faucets, such as copper, PVC, cast iron, and stainless steel. At present, most of the high-end faucets on the domestic market use pure copper as the main raw material. According to experts, the lead content in copper and copper faucet castings is usually 4%-8%. If the faucet is not used for a long time, the inner wall will produce green rust. The lead and other substances in it may be released into the tap water. High water can cause lead poisoning, which will not only affect the mental growth of the drinker, but also seriously affect the health of the body, and will have a greater impact on children.

Copper is more likely to rust, so the surface of copper products is usually plated, that is, a layer of nickel or chromium is plated on the surface, and the plating layer will gradually peel off depending on the quality and thickness of the plating. In the fast one year, the slower gradually loses the surface luster and numbness in 3-5 years. Finally, the plating layer peels off and exposes the copper rust, which affects the appearance and use, and thus needs to be replaced constantly, which causes waste of resources. The wastewater generated by electroplating is very serious to the environment.
In our interview, it was found that almost all merchants said that their copper faucet materials are made of pure copper. According to some industry insiders, the quality of copper materials in many companies is not good. Some middle and low grade copper faucets are due to The electroplating process is poor, and the plating layer will fall off in less than a year or two, so it is easy to produce rust spots.

It is understood that the surface of the stainless steel faucet does not need to be plated, and its surface only needs physical processing such as polishing and polishing, and it can maintain silver luster for a long time, never rust, is more environmentally friendly and durable, and is easy to clean.

It can be seen that as long as manufacturers can pass the technical threshold of stainless steel faucet manufacturing, it is bound to bring revolutionary changes, and stainless steel faucets will naturally achieve the future.

The reporter visited the Kaiping Shuikou of the faucet production base and learned that many faucet manufacturers with certain strength have turned their attention to stainless steel faucets. Some have years of experience in R&D and trial production. I believe that in the near future, they can also be in stainless steel. The field of faucets reshapes the glory of the mouth of the year.

The staff of Shuikou China Sanitary City told reporters that the current stainless steel faucet is made of 304 stainless steel. The production process of stainless steel faucets is difficult and the cost is relatively high. The market price is also higher than the copper faucet. At present, only those with economic strength can start to consume stainless steel faucets. It is estimated that after five years, the process of stainless steel faucets will gradually develop and mature prices will gradually decline, and stainless steel faucets will certainly become more popular.

In the building materials street of Jianghua Road in Pengjiang District, Jiangmen City, the reporter learned from the exchanges with the dealers that the faucets they are currently mainly in stainless steel, copper and zinc alloys, mostly from Kaiping Shuikou and Wenzhou City, Zhejiang Province. The sales of copper faucets are mainly in the stage, and the copper faucets are relatively good to sell. Some of the stainless steel faucets produced today are mostly iron-plated copper and then chrome-plated. They are easy to rust during use, and the processing is difficult, and the agent Stainless steel faucets are more expensive than copper faucets in terms of price. In the short term, they are still optimistic about copper faucets, but with the improvement of technology, the stainless steel faucets will be hotter for future market prospects.

Taken together, whether it is manufacturers, distributors, or professionals in the industry, they are generally optimistic about the future of stainless steel faucets. In the future, who is the world in the next 5-10 years, let us wait and see!

Inkjet Consumables

There are many types of consumables, ink, detergent, solvent and so on. It can perfectly solve your code-jet scheme according to the different needs of customers.

All products are compatible/alternative spare parts
All of the products display in our website are only used for samples display.It doesn't mean we have obtained the authorization&have the right to marketing the products of following brand:   Domino®, Markem-Imaje®,Linx®,Willett,Videojet®,Citronix®.
Our products are all compatible with non-original(Not genuine),all of the products are not in any way associated with the above mentioned brand.
If the price is different, subject to salesman's quoted.
About the freight, it is better to consult customer service first.

TIJ One Inch Ink Cartridge

TIJ One Inch Ink Cartridge, Ink Cartridge, Printer Ink Cartridge, Printer TIJ One Inch Ink Cartridge

GUANGZHOU INCODE MARKING TECHNOLOGY CO., LTD. , https://www.gzincode.com

Posted on